New Inventory

Extra Large Utility Grapple   Can be fitted to THMBHV & THMBHVX buckets  Specific heavy duty design for handling large round and square bales  Opens up to 72”  Removable / bolt-on mounting posts  Accomodates 6ft round bales           ...

Single Arm Log Grapple   Removable log grapple for pallet forks  Clamps onto Class II or III fork frame (walk through guards only)  C/w Hydraulic cylinder           ...

Log Grapple   Grapple version of HD55/HD75 pallet fork  42" solid fork lift tines  5500/7500 lbs capacity  C/w HD Cylinders           ...

Debris Grapple Fork   Two independent grapples  Replaceable tempered tines eliminate the need for a support bar at points which reduces lodging and jamming when emptying bucket  Designed to pick-up brush and other debris while leaving the dirt  39" Conus II cranked Kverneland tines (32" usable length)  Cylinders completely protected from debris  Comes with 2...

Manure Fork with Cranked Kverneland Tine & Skidsteer Grapple   Designed for use on skidsteers with limited clearance for grapple arms  Comes with 2-1/2" x 8" cylinders           ...

Regular Duty Stone Fork with Retainer Style Tine & Skidsteer Grapple   Designed for use on skidsteers with limited clearance for grapple arms  Same great features as regular & heavy duty stone forks  Comes with 2-1/2" x 8" cylinders           ...

Low Profile Skidsteer Bucket & Skidsteer Grapple   Designed for use on skidsteers with limited clearance for grapple arms  Comes with 2-1/2" x 8" cylinders           ...

Standard Skidsteer Bucket & Skidsteer Grapple   Designed for use on skidsteers with limited clearance for grapple arms  Comes with 2-1/2" x 8" cylinders           ...

Scrap Grapple Bucket (Skidsteer)   Two independent grapples  1/4" material, 3/8" end plates  3/4 X 6 bevelled cutting edge  Ideal for awkward abrasive loads  31" overall height  34" overall depth  Comes with 2-1/2" x 8" cylinders  Drilled for standard bolt on cutting edge           ...

Compact Scrap Grapple Bucket (Skidsteer)   3/16" material, 1/4" end plates  3/4 X 4 bevelled cutting edge  Single grapple arm  26" overall height  26" overall depth  Opens to 36"  Comes with 2-1/2" x 8" cylinder  Drilled for standard bolt on cutting edge  Add 2" to Inside Width column to calculate Outside Width of bucket      &n...

Compact Brush Grapple   Opens to 38" wide from ground to point of grapple  Tine tips and grapple tips are AR400 material  Tine spacing 6" on center  Single grapple arm  28" overall height  33" overall depth  Comes with 2-1/2" x 8" cylinder           ...

Brush Grapple   Opens to 48" wide from ground to point of grapple  Tine tips and grapple tips are AR400 material  Tine spacing 5-1/2" between  Independent grapples for clamping of awkward loads  Comes with 2-1/2" x 8" cylinders           ...

Light Duty Root Rake c/w Hydraulic Grapple   Light weight with rugged design for compact loaders  28" overall height when closed  7-3/8" centre to centre tine spacing  Points are 1/2" thick, commercial steel  Opens up to 33-1/2"  Comes with 2-1/2"x 8" cylinder           ...

Light Duty Root Rake c/w Electric Grapple   Light weight with rugged design for compact loaders  28" overall height when closed  7 3/8" centre to centre tine spacing  Points are ½" thick, commercial steel  Opens up to 33 ½"  Comes with an 8" stroke 12V heavy duty linear actuator  Comes with electrical wire kit and switch for actuator control  &nb...

Root Rake c/w Grapple   Two independent grapples for complete clamping on awkward loads  34" overall height when closed  Points are 1/2" thick, 400 Brinell high tensile steel  7-3/8" centre to centre tine spacing  Opens up to 48-1/2"  Comes with 2-1/2" x 8" cylinders           ...

Hydraulic Bale Claw   Ideal for handling stacked large square bales  12 hydraulic claws rotate into stack for secure handling  72" overall height  Frame width 64"  6000 lbs capacity  3 Kverneland tines @ 23" spacing  Approximate weight 1090 lbs           ...

Hydraulic Rotary Broom   Unique lateral and forward float  Gauge wheels  Includes electric selector valve and wire kit (if you do not choose OEM control kit)  Includes hydraulic hoses and flat-faced couplers  26" diameter poly/steel bristle wafers  Hydraulic angle 30° right and left  Direct motor drive on broom  Hydraulic requirements: 12-20 GPM @...

Hydraulic Rotary Pick-up Broom   Ideal for cleaning up parking lots, construction sites, streets, curbs and gutters as well as parks and recreation areas etc.  Includes hydraulic hoses and flat-faced couplers  26" diameter poly/steel bristle wafers  Direct motor drive on broom  Hydraulic requirements: 12-20 GPM @ 1500 - 3000 PSI  Front gauge wheel  Reve...

Heavy Duty Rubber Free Stall Scraper with Back Drag   Heavy duty rubber for longer life  Deeper scraper for more volume and smoother operation  Enclosed frame with splash plate  Allows clean-out of corners  18" high rubber           ...

Heavy Duty Rubber Free Stall Scraper   Heavy duty rubber for longer life  Deeper scraper for more volume and smoother operation  Enclosed frame with splash plate  18" high rubber           ...