New Inventory

Rubber Feed Alley Scraper   Power angle  Easy on concrete or tiled floor mangers  24" high  Angles 45° either direction           ...

Hydraulic Adjustable Rubber Scraper   Heavy duty rubber for longer life  Hydraulic flow divider for equal movement of wings  24" tall rubber           ...

Silage Facer - Bucket Mount   Minimum 20 GPM required  Maximum flow 40 GPM  Facing drum mounted on bucket  400 Brinell high tensile steel teeth on drum  Dual drive motors  Heavy duty roller drive chains  Includes hose kit and flat-faced couplers           ...

Silage Facer - Frame Mount   Minimum 20 GPM required  Maximum flow 40 GPM  Facing drum mounted on a 4 ft frame  400 Brinell high tensile steel teeth on drum  Includes hose kit and flat-faced couplers  Dual drive motors  Heavy duty roller drive chains           ...

Silage Grapple Bucket   Heavy duty grapple integrated into the bucket design  Strategic pivoting arc design on the grapple for more power and less disturbance of the bunk silo face  3 X 16 cylinders with 1-½" diameter pins  2" diameter pivot pins on grapple  For outside width add 2" to inside width column.  3/4" AR400 bolt on grapple teeth    &nbs...

5000 Series Silage Blade - Front Wheel Assist Tractors   For front wheel assist tractors only  Compatible with SB5QDM Series undercarriage blade mounts.  Heavy duty construction with two angle cylinders  Reversible cutting edge  Skid shoes are standard  58" high blade  34" high mouldboard  24" high mesh guard  3 x 16 cylinders with 1-1/2" diam...

Bale Knife - Loader Mount   Slice bales up to 72" in diameter  Proprietary grabber holds and retains plastic and net wrap, eliminates “tail” dropping into mixer  Cuts down TMR processing time up to 30%  The BK60 and 72 have adjustable bumper to accommodate bales down to 48”  Individual bolt on knives for easy replacement  Minimum hydraulic pressure: 27...

6000 Series Silage Blade    Designed for articulated tractors only  Quick attach design  Heavy duty construction  Dual hydraulic angle cylinders  Dual manual jacks ensures easy hook up and safe storage  Hydraulic radial lift  Hydraulic tilt cylinder  Forward mounted hydraulic connectors for ease of connection  No tool quick attach locking pins...

Single Three Point Hitch Spear   Reese receiver / ball hitch (Ball hitch not included)  Fits both CAT I & II  Kverneland tine  2 stabilizer tines  2000 lbs capacity @ 24" L.C.  Available with 39" or 49" tine  Approximate weight: 87 lbs           ...

Double Three Point Hitch Spear   Reese receiver / ball hitch (Ball hitch not included)  Fits both CAT I & II  Kverneland tine  Available with 39" or 49" tine  Approximate weight: 117 lbs  2000 lbs capacity @ 24" L.C.           ...

Single Prong Bucket Spear   Kverneland tine  2000 lbs capacity @ 24" L.C.  Adaptable to most buckets  No tools or bolts needed  Comes with chain & tightener  Approximate weight: 86 lbs           ...

Double Prong Bucket Spear   Kverneland tines @ 30" spacing  Same as single bucket spear but with extra tine to handle large square bales  Approximate weight: 112 lbs  2000 lbs capacity @ 24” L.C.           ...

Single Prong Bale Spear   Kverneland tine  Easy stabbing & removal  2000 lbs capacity @ 24" L.C.  Available with 39" or 49" tine  Two stabilizer tines  Approximate weight: 165 lbs  Frame width 50”           ...

Double Prong Bale Spear   Kverneland tines @ 30" spacing  Works well for either round bales or large square bales  Not to be used for carrying 2 bales stacked on top of each other  Available with 32", 39" or 49" tines  Approximate weight: 185 lbs  4000 lbs capacity @ 24” L.C.  Frame width 50”           ...

Double Prong Bale Spear c/w Guard   Kverneland tines @ 30" spacing  Works well for either round bales or large square bales  Comes with bolt-on guard  Added protection for handling large square bales 2 high  Safety foot for roll over protection while in storage position  50" overall height  Available with 32", 39" or 49" tines  Approximate weight: ...

Three Prong Bale Spear   Kverneland tines @ 23" spacing  Made to handle large 4' x 4' x 8' square bales  Not to be used for carrying 2 bales stacked on top of each other  Available with 32", 39" or 49" tines  Frame width 50"  Approximate weight: 210 lbs  5000 lbs capacity @ 24” L.C.           ...

Three Prong Bale Spear c/w Guard   Kverneland tines @ 23" spacing  Made to handle large 4' x 4' x 8' square bales  Available with 32", 39" or 49" tines  Frame width 50"  Approximate weight: 330 lbs  Comes with bolt-on guard  Added protection for handling large square bales 2 high  Safety foot for roll over protection while in storage position ...

Three Prong Bale Spear c/w Adjustable Guard   50" high frame with adjustable guard posts for safe handling of large square bales up to 3 high  Safety foot for roll over protection while in storage position  Extended height of 84"  Retracted height of 50"  Available with 32", 39" or 49" tines  Frame width 56"  Approximate weight: 365 lbs  6000 lbs c...

Four Prong Bale Spear c/w Adjustable Guard   Designed specifically for carrying large 4' x 4' x 8' square bales, 2 high  Safety foot for roll over protection while in storage position  Available with 39" or 49" tines  Extended height of 84"  Retracted height of 50"  Frame width 66"  Approximate weight: 415 lbs  6000 lbs capacity @ 24” L.C.  ...

Four Prong Bale Spear For Round Bales   Designed specifically for carrying 2 round bales  Can carry 2 round bales up to 6' diameter  Frame width 100"  Approximate weight 340 lbs  4000 lbs capacity @ 24” L.C.  Kverneland tines, each side @ 29” spacing           ...