The Weidemann benefits at a glance

Weidemann articulated pendulum joint

The backbone of the Weidemann design. The legendary articulated pendulum joint. All four wheels remain in constant contact with the ground and the machine moves with maximum traction. In addition, the machine has unrivalled manoeuvrability.

High quality powder coating

Quality creates added value. The powder coating is a key feature of the Weidemann quality standard. In contrast to the conventional wet painting, it greatly increases the service life and is more efficient and also environmentally friendly in the process.

High shear forces from planetary axle

The drive via the planetary axle increases the torque on the wheel and thereby improves the shear force. Due to the optimal ratio between the shear force and machine capacity, you work flexibly and economically at the same time.

100% differential lock

The connectible 100% differential lock provides maximum traction and thrusting force if necessary. It also keeps the tire wear low (switched off during normal operation). This increases the efficiency of your machine!

Two strong lift cylinders

Weidemann always installs two lift cylinders in all Hoftrac and wheel loader models. This guarantees that the load distribution is always optimally transferred to the loading arm. In addition, the entire loading system gains stability. The size of the lift cylinder is adapted to the respective size of the machine.

Perfectly matched Z-kinematics

The angled loading arm is designed to be particularly sturdy and torsion resistant. At Weidemann, the kinematics are adjusted to the size of the machine - this ensures optimal balances of power for every machine. The Z-kinematics ensure that the force will always be utilised optimally when loading and unloading the bucket. In doing so, the Z-kinematics generate tremendous lifting and shearing forces in quick cycles.

Stainless steel steering stops

At a full steering stop, the front and rear carriage of the machine touch. With Weidemann, this area is particularly well-protected by the stainless steel steering stops and the machine’s paint is not damaged. This provides for value preservation!

Large selection of attachments tools

Use your machine as a multi-tool: you have a wide selection of attachments available for your Weidemann. Here you can find which attachment in what size is right for your machine »

Large selection of tires

The optimal tires for every subgrade - you have a wide selection of different tires available for your Weidemann. You can find which tires are right for is right for your machine »

Your operator’s cab

Comfortable cabin

The spacious cabin meets the current European machine directive (2006/42/EC) according to ROPS and FOPS protection and offers a great deal of headroom and freedom of movement. Thanks to the complete glazing, the operator has an excellent overview of the attachments and the entire working area.

Optimum ease of servicing

T iltable cab

Only at Weidemann: The tiltable cabin allows for easy access to the engine, hydraulic system and electrical system. Maintenance and service made extremely easy!

Easy-to-open engine hood

The engine hood can be opened upward with just one handle for regular service and maintenance work. The hydraulic oil tank, air cleaner, engine oil fill opening, oil-level dipstick and cooling water are therefore quickly and easily accessible.

Easily accessible lubrication service points

Regularly greasing all lubrication points of the machine is crucial for the proper and effective maintenance and therefore value retention of the machine. In order to save time and facilitate the work, the lubrication service points are always in an easily accessible position at Weidemann. Optionally, a central lubrication system is available that takes over the lubrication for you.

Short hydraulic hose lengths

Weidemann machines have short hydraulic hose lengths - the hoses are split in several places. If a hydraulic hose needs to be exchanged, the entire hose in the hydraulic circuit does not need to be exchanged, but rather just the affected part. This speeds up work enormously and saves money.

A workplace that motivates

Adjustable steering wheel

The steering wheel can be individually adjusted according to the operator's request. This ensures that every operator can work with the machine ergonomically and fatigue-free.

Ergonomic joystick  - everything in one hand

Perfect control of the machine and functions via a joystick of the latest generation. The innovative joystick with ergonomically arranged, illuminated touch controls creates user friendliness and multi-functionality.

Hydraulic oil volume adjustment via a jog dial

If necessary, the "jog dial" control element can be used to manually set the flow rate of the hydraulic oil. This is advantageous if the machine is operating a hydraulic attachment that does not require the full hydraulic performance of the machine. The operator can therefore work precisely and in a resource-saving manner with a machine and attachment.

Good all-round visibility - ergonomic workplace    

Plenty of legroom, clearly arranged instrument clusters, a comfortable operator’s seat and an optimal visibility of the attachment. A working area that motivates and fully supports the operator.          

Pleasant working environment

The working environment in the cabin is excellent, thanks to an efficiently working heater and ventilation system with a fan, fresh air filter and well-placed air nozzles. For particularly hot outdoor temperatures, we recommend the air-conditioning system option.

Rooftop air-conditioning system

The optionally available rooftop air-conditioning system provides a pleasant working climate inside the cabin when the outside temperatures are high. In addition, it offers a high airflow rating (cfm) and convinces with an optimised cooling performance. The operator's control for the control system and the air nozzles are located inside the roof area of the cab.

Vibration-damped working area

Vibrations and impacts are absorbed by the machine. Your body is very well protected and you also work for a longer period of time more relaxed and fatigue-free - and therefore are more focused.

Brake-inch pedal

In Weidemann machines, the hydrostatic 4 wheel drive is combined with the brake pedal. Through the inching, this enables creeping until standstill. With the partially depressed brake-inch pedal, you can drive slowly in crawl speed at full engine speed precisely to the millimetre and at the same time lift quickly. If the pedal is pressed further, the machine is braked. The advantage of the brake-inch pedal is the optimal distribution of the engine output. In addition, it is not possible to stall the machine.

New wheel loader generation

New exhaust emission standard stage IV — new engine technology

At Weidemann, we have recently completed stages I to IIIB for pollutant reduction. However, new and stricter thresholds in Stages IV and V are waiting to be met. However, because we would like to adapt our machines to the new legal situation and continue to develop our machines, we have put a great deal of developmental work and know-how into the new machine types.

Digital display & wedias diagnostics and analysis system

With the digital display, you obtain an overview of your machine. In addition to standard displays, such as temperature, tank filling, or operating hours, active functions (e.g. electrical functions, the continuous operation of the 3rd control circuit, or the activated differential lock) are displayed in the cab. Due to the Weidemann diagnostic and analysis system wedias, many functions, including the drive function, telescoping function, the 3rd and 4th control circuit, the engine data as well as the electric functions, can be quickly and clearly evaluated. Error messages in the display immediately notify the operator of possible errors and make a rapid response possible. Thanks to the exact designation of the error number, the dealer can come to the machine prepared and with the right spare parts. The subsequent error analysis by trained dealers simplifies further diagnosis and troubleshooting. This saves time, money and nerves!

40 km/h speed

Due to a larger hydraulic motor and a larger variable displacement pump, there is a new 40 km/h version. With this option, the machine receives a lifting arm damping with three different modes and up to 20 % more pushing power is available. Of course, the machine can also be moved faster from
A to B.

Trailer operation

Thanks to the optional trailer coupling, all Weidemann wheel and telescopic wheel loaders can pull a trailer with a total weight between 5 and 8 t –
depending on the model. An automatic trailer coupling (fixed or height adjustable), a height adjustable ball coupling trailer coupling or a "hitch" trailer coupling are available. In Germany, the machine must be approved as a self-propelled work machine with trailer coupling or as a tractor. To find out about international regulations, please contact your local Weidemann distributor.

Pressure release of 3rd control circuit

The machine also offers a special feature that is helpful for coupling and uncoupling hydraulically operated attachments: The knob for pressure release of the 3rd control circuit is easily accessible from the outside on the telescopic arm. As a result, different attachments can be changed more quickly and efficiently. This works even with the ignition switched on or the engine running.